
High-Temp Double-Sided Polyimide Kapton Tape | 260°C SMT PCB Wave-Soldering Insulation - STK
STK's High-Temp Double-Sided Polyimide Kapton Tape represents the engineering pinnacle of ultra-thin, high-reliability electrical insulation and thermal masking designed specifically for the rigorous environments of surface mount technology (SMT), wave-soldering, and semiconductor packaging lines. Constructed from a premium-grade, dimensionally stable polyimide film backing infused on both sides with an advanced, high-performance thermosetting silicone pressure-sensitive adhesive (PSA), this technical tape provides critical physical anchoring and electrical decoupling simultaneously.
It handles extreme thermal spikes without shrinkage, curling, or chemical outgassing, making it the definitive choice for bonding flexible printed circuits (FPCs), stabilizing heat-sink interfaces, and shielding critical gold finger terminals during automated production cycles.
Request High-Temp Double-Sided Polyimide Tape Wholesale Pricing
Engineering Precision: Zero Adhesive Residue at 260°C Thermal Exposures
For quality control engineers managing high-density printed circuit board assemblies (PCBA), the primary failure mode of standard sub-grade high-temperature tapes is adhesive transfer or carbonization during the lead-free reflow profile. When a tape leaves microscopic sticky silicone oil footprints on gold fingers or critical test pads, it creates catastrophic solder joint voids or electrical contact failures. STK's premium double-coated polyimide matrix completely neutralizes these costly production liabilities:
• Laboratory-Verified Zero Residue Matrix:
Formulated to undergo structured cross-linking when exposed to thermal bakes, this tape is certified to endure continuous thermal profiles up to 260°C (500°F) for 30 consecutive minutes or short-term wave-soldering peaks of 300°C (572°F). It peels away cleanly from fragile copper, gold, and FR-4 surfaces leaving absolutely zero sticky residue, trace ghosting, or chemical contamination.
• Excellent Dielectric Strength Protection:
Possesses an inherent high-voltage barrier capacity (≥ 5.0 kV breakdown limit per layer), ensuring optimal phase-to-phase electrical isolation inside tightly packed high-frequency transformers, lithium battery cells, and micro-inverter housings.
• Flawless Dimensional Chemical Inertness:
Unaffected by industrial chemical flux sprays, isopropyl alcohol (IPA) circuit board washing solvents, and aggressive soldering heat. It maintains a perfectly stable layout outline without exhibiting edge-curling or stretching.
Technical Specifications
| Product Description | Double-Sided Polyimide Tape | Double-Sided Polyimide Tape | Double-Sided Polyimide Tape | Double-Sided Polyimide Tape |
|---|---|---|---|---|
| Film Thickness (mm) | 0.025 | 0.025 | 0.05 | 0.075 |
| Overall Thickness (mm) | 0.05 | 0.09 | 0.125 | 0.175 |
| Adhesive System | Silicone Adhesive | Silicone Adhesive | Silicone Adhesive | Silicone Adhesive |
| Carrier Material | Polyimide Film | Polyimide Film | Polyimide Film | Polyimide Film |
| Appearance Color | Amber | Amber | Amber | Amber |
| Release Liner | Fluoro Silicone Liner | Fluoro Silicone Liner | Fluoro Silicone Liner | Fluoro Silicone Liner |
| Front-Side Peel Adhesion to Steel (N/25mm) | 7 | 8 | 8 | 8 |
| Back-Side Peel Adhesion to Steel (N/25mm) | 6 | 7 | 7 | 7 |
| Ultimate Elongation (%) | 35% – 50% | 35% – 50% | 35% – 50% | 35% – 50% |
| Dielectric Strength (kV) | 3.5 – 4 | 3.5 – 4 | 5 – 8 | 5 – 8 |
| Intermittent Temperature Resistance (°C) | 300 | 300 | 300 | 300 |
| Continuous Operating Temperature (°C) | 260 | 260 | 260 | 260 |
Application
SMT Wave-Soldering Gold Finger Masking: Providing dual-sided protection and secure anchoring for temporary heat shields and component sensors over circuit traces during automated soldering waves.
Flexible Printed Circuit (FPC) Stiffener Attachment: Permanent high-strength bonding of thin polyimide or FR-4 stiffener plates to the backboards of flexible display ribbon connectors.
Lithium Battery Cell Insulation Wrapping: Insulating positive/negative terminals and anchoring high-voltage sensor leads inside next-generation electric vehicle (EV) battery modules.
High-Frequency Transformer Coil Interlayer Insulation: Serving as a double-sided, high-dielectric barrier separating copper windings on compact switching power supply units.
B2B Precision Converting: Pre-Scored Liners & Custom Die-Cut Gaskets
Automated component picking lines and high-speed electronics assembly plants cannot accept standard bulk tape logs without slowing down their units-per-hour (UPH) targets. STK directly optimizes your production throughput through advanced technical conversion:
Dual Fluoro-Silicone Easy-Release Liners: To facilitate seamless conversion and easy handling, our double-sided polyimide tape is supplied mounted with premium, pre-scored fluoro-silicone release liners on both sides (or a single easy-peel paper/PET liner framework). This configuration ensures the tape will not stretch or deform when peeled.
CAD/PDF Precision Micro Die-Cutting: Send us your engineering schematics. We utilize automated flatbed and high-speed rotary die-cutting machinery to convert double-sided Kapton tape into intricate miniature square frames, washer dots, or customized terminal outlines with an exact engineering tolerance of $\pm 0.05\text{mm}$.
Supplied with Extended Pull-Tabs: Die-cut profiles are layout-matched on continuous clear PET carrier rolls incorporating extended non-adhesive pull-tabs (finger-lifts). This allows automated vacuum pick-and-place SMT robotics to deploy the insulating pads flawlessly without manual line placement.


Equipment




Hot Tags: high-temp double-sided kapton tape for pcb and electronics assembly, China high-temp double-sided kapton tape for pcb and electronics assembly manufacturers, suppliers, factory, double side polyimide tape, double side tape










