China Single Side Tape Manufacturers Suppliers Factory - Customized Single Side Tape

Your Professional Single Side Tape Manufacturer!

STK Tape supplies single sided adhesive tapes for electrical insulation, high-temperature masking, surface protection, thermal management, and industrial assembly. Choose from polyimide, PET, PTFE, glass cloth, aluminum foil, and other specialty tape materials, with custom slitting and precision die-cutting services to meet your application requirements.

Cloth Duct Tape Dots | Customizable Pre-Cut Adhesive Dots For Temporary Fixation & Cabl...
Cloth Duct Tape Dots are versatile, pre-cut, pressure-sensitive adhesive dots engineered for reliable temporary fixation and organization. They feature a durable cloth backing, reinforced with a
3M™ Masking Tape Series (2142, 2693, 2380, 214) | Solvent-Resistant Synthetic Rubber Ad...
The 3M™ High Performance Masking Tape Series includes trusted products like 3M 2142, 3M 2693, 3M 2380, and 3M 214. These tapes feature a soft, conformable crepe paper backing coated with a
High Temperature Polyester PET Tape – Heat-Resistant Single-Sided Tape For Masking, Ins...
Source premium PET Green Masking Tape from STK. Engineered for +200°C powder coating, electroplating, and anodizing masking applications with clean, residue-free removal. Factory-direct wholesale
Heat-Resistant Polyimide Tape，Single Side Tape– High-Temperature Insulation & Masking T...
Source premium polyimide tape (Kapton tape alternative) from STK. High-temperature film for SMT wave soldering masking and insulation with custom die-cut dots.
High Temp Aluminum Foil Tape 0.06 – Heavy-Duty Heat Resistant Adhesive Tape
High Temp Aluminum Foil Tape 0.06 is a premium grade aluminum foil adhesive tape designed for demanding high-temperature applications. With a durable 0.06mm aluminum foil backing, this tape offers
Heat Resistant Aluminum Foil Tape 0.03mm – Premium High-Temp Sealing And Shielding Solu...
Order factory-fresh 0.03mm heat resistant aluminum foil tape. Perfect for HVAC duct sealing, pipe insulation wrapping, and moisture barriers. Bulk factory pricing.
Double Conductive Aluminum Tape: Dual-Sided Shielding and Grounding (0.055-0.13mm)
Source premium dual-conductive aluminum foil tape featuring high Z-axis conductivity and ultra-low contact resistance for grounding. Ideal for laptop enclosures, transformers, and EMI shielding.
Conductive Copper Foil Tape | Single Side Copper Tape | EMI Shielding & Grounding Adhes...
Industrial-grade single-sided conductive copper foil tape for electronics EMI/RFI shielding. Ultra-low surface resistivity (≤ 0.05 Ω). Custom precision die-cutting available for smartphones,
Mylar Aluminum Foil Tape | Single Side Aluminum Polyester Tape | Insulation, Shielding ...
High-tensile Mylar aluminum foil tape (AL/PET) for industrial cable wrapping, electronics EMI shielding (LCD, smartphone), and HVAC refrigeration. Supply jumbo rolls for automated wrapping machines.
Aluminum Foil Tape | Single Side Aluminum Tape | HVAC Ducts, Insulation, Heat Resistanc...
Source industrial aluminum foil tape for HVAC duct sealing, vapor barriers, and thermal insulation. High thermal conductivity & flame retardant (UL rated). Get pallet-level wholesale pricing for EPC
PE Coated Cloth Duct Tape | Single Side Duct Tape | Industrial Repair, Packaging, Water...
ource factory-direct PE coated cloth duct tape. 0.22mm thick, ultra-sticky, waterproof fabric masking tape for industrial bundling, pipe sealing, and carpet fixing. Bulk pricing.
High Temperature Glass Cloth Tape | Single Side Glass Cloth Tape | Electrical Insulatio...
Industrial-grade glass cloth tape with high mechanical strength and 260°C heat resistance. Ideal for thermal spray masking and sandblasting protection. Guaranteed clean removal with zero residue.

Single Sided Tape & Specialty Material Converting Solutions | STK

How to Choose a Single Sided Tape

STK manufactures and converts industrial single sided adhesive tapes using Polyester (PET), Polyimide, PTFE, Aluminum Foil, Cloth, Glass Cloth, and Crepe Paper backings paired with engineered Acrylic, Silicone, or Rubber adhesive systems. Designed for applications across electronics, automotive, electrical, HVAC, construction, packaging, aerospace, and general industrial manufacturing, our single sided adhesive tapes can be supplied in standard rolls, jumbo rolls, slit rolls, and precision die-cut parts.
Selection depends on more than backing material alone. We recommend a single sided tape by reviewing continuous and peak operating temperatures, substrate surface energy, required adhesion or release behavior, residue tolerance, and converting format.
Backing——The backing provides the tape with its mechanical strength, flexibility, temperature resistance, electrical insulation, shielding, or surface protection properties.
Adhensive——The adhesive determines adhesion, tack, holding power, residue performance, temperature resistance, and compatibility with the target substrate.
Release Liner——For linered constructions, the release liner protects the adhesive before application and supports clean, controlled release.

Major Material Portfolio & Featured Series

Material	Best Suited For	Key Selection Questions	Direct Page Link
Polyester (PET)	Powder coating masking, PCB protection, general industrial bonding	What operating temperature and dwell time apply? Is clean removal required?	PET tape
Polyimide (PI)	Wave soldering, high-temperature electrical insulation, 3D printing beds	What continuous/peak temperature applies? Is dielectric strength or ESD antistatic required?	PI tape
PTFE (Teflon)	Non-stick heat sealing, low-friction chute lining, chemical masking	What surface release property is required? What is the continuous exposure temperature?	PTFE film tape
Aluminum Foil	HVAC duct sealing, thermal reflection, EMI/RFI shielding	What foil thickness and flame-retardant rating (e.g., UL 510) are needed? Is conductive adhesive required?	aluminum single side tape
Cloth / Duct	Heavy-duty bundling, surface protection, pipe sealing, sandblasting	Is hand-tearability required? What level of initial tack and waterproofing is needed?	Cloth Tape
Crepe Paper	Automotive paint masking, general holding, indoor bundling	What curve conformability and temperature baking conditions apply?	Crepe Paper
Glass Cloth	Heavy-duty electrical insulation, plasma/thermal spray masking, sandblasting protection, high-tensile cable bundling	High tensile strength required? Extreme mechanical abrasion resistance needed? Thermal spray or sandblasting exposure?	Glass Cloth Tape

Single Sided Tape by Function

Application Requirement	Recommended Tape Types
High Temperature Masking	Polyimide / PET / Glass Cloth
Electrical Insulation	PET / Polyimide / PVC / Glass Cloth
EMI / RFI Shielding	Copper Foil / Aluminum Foil / Conductive Tape
Surface Protection	PET / PE / PVC Film
Painting & Coating Masking	Crepe Paper / PET / Polyimide
Bundling & Wrapping	PET / PVC / Cloth / Duct Tape
Sealing	Aluminum Foil / PE / Cloth / PVC
Friction Reduction	PTFE / UHMW-PE
Thermal Insulation	Aluminum Foil / Specialty Film
Temporary Fixing	Cloth / PET / Paper Tape

With in-house coating, slitting, rewinding, and die-cutting capabilities, STK Tape supports customized tape solutions based on backing material, adhesive type, thickness, width, temperature resistance, adhesion, and application requirements.

Send your application requirements and our technical team will recommend a material construction, confirm specifications, and provide samples for testing.

Get a Quote — You already have your drawing, roll dimensions, or specification.

Request a Sample — You need to evaluate adhesive performance or thermal residue on your line.

Required Data Before You Order

Confirm these items with your process engineer before requesting a quote:

Operating Temperature Profile: Continuous-use temperature and peak temperature with dwell time (e.g., 200°C for 30 minutes in a baking oven).

Substrate Material: The exact surface the tape adheres to (e.g., stainless steel, anodized aluminum, PCB gold fingers, low-energy plastics).

Adhesion & Removal Requirement: Permanent holding, temporary masking, or clean removal with zero adhesive residue.

Environmental Exposure: Exposure to UV, moisture, solvents, electrolytes, or mechanical abrasion.

Format & Geometry: Master jumbo roll, log roll, precise slit width, or die-cut parts on rolls/sheets.

Factory Capability Snapshot

Why Source Tape From STK

A real manufacturing partner behind every roll — not a reseller.

20+ Years of Tape Converting Experience

±0.1mm
Slitting Tolerance

die-cut-3m-300lse-double-sided-adhesive-tapes

24 Hours
Quote & Feasibility Response

ISO 9001 / ISO 14001
Certified Manufacturing

Our factory & quipment

coating machine

laminating machine

rewinding machine

slitting

Tape-Die-cutting

Industry Applications for Single-Side Tapes & Functional Materials

Single sided tapes are selected based on process engineering requirements rather than broad industry labels. Each application area below covers specific technical criteria.

PCB And Electronics Manufacturing

01.

Heavy Electrical & Industrial Equipment Insulation

Used in industrial power equipment, heavy machinery wiring, generators, and transformer manufacturing where mechanical stability and electrical dielectric protection must function together under elevated working temperatures.

Typical Tapes Used: High-Temp Glass Cloth Tape, Polyimide Insulation Tape, Heavy Duty Vinyl Electrical Tape.

Key Requirements: High breakdown voltage (dielectric strength), Class H/F thermal insulation rating, resistance to transformer oil, non-flammable behavior.

Primary Uses: Transformer coil wrapping, heavy motor lead wire insulation, industrial switchgear bundling, generator armature insulation.
Links: High temperature glass cloth tape →

02.

General Industrial Masking & Surface Protection

Used to shield smooth, painted, polished, or sensitive substrates during manufacturing, transport, assembly, and outdoor processing. Selection is driven by surface conformability, clean removal without ghosting or residue, and resistance to scratches and light chemicals.

Typical Tapes Used: Crepe Paper Masking Tape, Polyethylene (PE) Surface Protection Tape, Low-Tack PET Tape.

Key Requirements: Controlled adhesion (low-to-medium tack), clean peel after long dwell times, resistance to ambient moisture, edge-curl prevention.

Primary Uses: Powder coating line masking, metal sheet surface protection, furniture manufacturing, architectural spray painting.
Links: 3M masking tape series →

Powder Coating Painting And Surface Masking

HVAC Building Sealing And Thermal Insulation

03.

HVAC, Building Insulation & Environmental Sealing

Used in building construction, refrigeration, and industrial ventilation systems to seal joints, protect insulation barriers, and prevent air/moisture leakage over multi-year lifespans.

Typical Tapes Used: Aluminum Foil Tape, Foil-Scrim-Kraft (FSK) Tape, Heavy-Duty Waterproof Cloth Duct Tape.

Key Requirements: Flame-retardant compliance (e.g., UL 181 / UL 510), low moisture vapor transmission rate (MVTR), cold-weather adhesion, long-term UV resistance.

Primary Uses: Sealing HVAC duct seams, join-insulation barrier sealing, refrigerator tubing thermal reflection, outdoor weatherproofing.
Links:Aluminum foil tape →

04.

Heavy-Duty Bundling, Splicing & Mechanical Securing

Used in heavy industrial manufacturing, logistics, construction, and mill operations where high tensile loads, impact forces, and mechanical tension are present. These tapes hold bulk materials together without stretching or snapping.

Typical Tapes Used: Woven Glass Cloth Tape, Reinforced Filament Tape, PE-Coated Cloth/Duct Tape.

Key Requirements: Extreme tensile strength, high tear resistance, aggressive initial tack (high shear strength), hand-tearability (for duct tape) vs. ultra-high breaking strength (for filament/glass cloth).

Primary Uses: Steel coil tabbing, heavy pipe and cable bundling, paper/film web splicing, shipping crate sealing, carpet installation.

Links: Cloth duct tape →

Automotive Battery And Industrial Processing

Common Failure Modes and Prevention

Single sided tape failure is usually caused by a mismatch between adhesive chemistry, backing thickness, substrate surface energy, and application conditions. Use the checklist below during product selection.

Residue After Removal

Typical causes: Adhesive softening due to excessive temperature or dwell time, incompatibility with substrate coatings, or improper removal angle.

Prevention: Match the adhesive cross-linking (e.g., cured silicone or specialized acrylic) to your actual thermal cycle and substrate before production release.

Edge Lifting or Curling

Typical causes: High backing memory/stiffness on curved surfaces, insufficient initial tack, or surface contamination (oil, dust, release agents).

Prevention: Clean the substrate prior to application, select a conformable backing (such as crepe paper or thin PET), and verify required peel adhesion.

Backing Tearing or Delamination

Typical causes: Insufficient tensile strength for high-tension splicing, or thermal embrittlement of low-grade films during baking.

Prevention: Choose high-tensile glass cloth or thick PET backings for mechanical tension applications.

Poor Adhesion / Delamination from Low-Energy Surfaces

Typical causes: Applying standard acrylic tape to low surface energy (LSE) materials like polyethylene, PTFE, or powder-coated metals without surface treatment.

Prevention: Utilize specialized high-tack synthetic rubber or modified silicone adhesives formulated for LSE substrates.

Send Your Tape Failure Details

Upload photos, substrate information, heating profiles, and current part numbers. STK's engineers will analyze the failure mode and provide alternative solutions.

Custom Converting and Insulation Capabilities

A single sided tape performs efficiently on the production line when converted into the exact format required by manual or automated assembly tools.

Converting Capabilities Matrix

Capability	Technical Scope & Specifications	Production Advantages
Precision Slitting	Roll widths from 1mm to 1200mm, Tolerance:0.1mm	Fits automated dispensers directly; eliminates material waste.
Custom Die-Cutting	Flatbed, rotary, and laser die-cutting for films, tapes, foams, and rigid sheets	Speeds up manual assembly with pull tabs and extended liners.
PSA Lamination & Liner Swapping	Single/double-sided PSA lamination onto Sabic Lexan, Formex, Nomex, or PORON	Creates pre-laminated self-adhesive insulation and sealing components.
Spooled Winding	Continuous long-length spooled rolls up to 100 meters	Reduces roll-change downtime on automated high-speed production lines.

How a Custom Order Runs

Application Review

You share operating temperature, substrate, roll dimensions, and annual usage requirements.

Material Recommendation

STK proposes a backing film, adhesive thickness, and converting format matched to your specification.

Sample & Trial Run

Sample policy: [INSERT VERIFIED sample policy]. Sample lead time: [INSERT VERIFIED sample lead time].

Specification Verification

Adhesion, total thickness, temperature tolerance, and die-cut tolerances are verified against drawings.

Mass Production Converting

Slitting, rewinding, or die-cutting executed under strict quality control standards.

Inspection & Delivery

Final quality inspection completed before shipment.

Material Selection → Adhesive Matching → Coating → Slitting → Rewinding → Die Cutting → Quality Inspection → Packaging

Uplode your requirements

Need a custom single sided tape? Send us your required backing, adhesive, thickness, width, application and temperature requirements.

Quality, Testing and Compliance

Critical manufacturing demands verified documentation. Complete technical datasheets, material safety sheets, UL yellow cards, and environmental declarations are provided per SKU.

Available Documents Table

Document	Content Summary	Access Process
TDS (Technical Data Sheet)	Backing type, adhesive chemistry, total thickness, peel adhesion, tensile strength, and temperature limits per SKU.	Download on SKU pages or request via email
SDS (Safety Data Sheet)	Chemical composition, handling safety, and storage conditions.	Download on SKU pages or request via email
RoHS 2.0 Compliance	Heavy metal and restricted substance test reports.	Available on request
REACH SVHC	Declaration of compliance regarding Substances of Very High Concern.	Available on request
UL 510 Flame Retardance	UL file number	Available on request
ISO 9001:2015	Quality Management System Cert.	Download on request
ISO 14001:2015	Environmental Management System Cert.	Download on request

Product Cards (Single Side Tape Listing)

Product Card Data Schema Table:

Material Category	Brand / Part SKU	Base Material / Carrier	Thickness Range	Temp / Flame Rating	Primary Application Format
Polyimide Tape	3M 5413 / 3M 7413 / STK PI Series	Polyimide Film / Silicone Adhesive	0.05 mm – 0.18 mm	Up to 260°C, depending on grade	High-temperature masking, PCB soldering, coil insulation
PET Film Tape	3M 850 / 3M 898 / STK PET Series	Polyester Film / Acrylic Adhesive	0.05 mm – 0.15 mm	Typically up to 130°C, depending on grade	Surface protection, color coding, component insulation
PTFE Film Tape	3M 5490 / 3M 5491 / STK PTFE Series	PTFE Film / Silicone Adhesive	0.08 mm – 0.25 mm	High-temperature grades available; verify by SKU	Non-stick surfaces, heat sealing, low-friction applications
Glass Cloth Tape	3M 69 / 3M 79 / STK Glass Cloth Series	Woven Glass Cloth / Silicone Adhesive	0.15 mm – 0.30 mm	High-temperature grades available; verify by SKU	Electrical insulation, coil wrapping, thermal protection
Crepe Paper Masking Tape	3M 232 / 3M 244 / STK Masking Series	Crepe Paper / Rubber or Acrylic Adhesive	0.10 mm – 0.18 mm	Typically 80°C – 160°C, depending on grade	Paint masking, powder coating, temporary surface protection
Aluminum Foil Tape	3M 425 / 3M 433 / STK Aluminum Foil Series	Aluminum Foil / Acrylic or Silicone Adhesive	0.08 mm – 0.15 mm	Grade-dependent; high-temperature versions available	Heat reflection, HVAC sealing, thermal shielding
Copper Foil Tape	3M 1181 / STK Copper Foil Series	Copper Foil / Conductive Acrylic Adhesive	0.06 mm – 0.12 mm	Grade-dependent	EMI/RFI shielding, grounding, electrical conductivity
PVC Electrical Tape	3M Temflex 165 / STK PVC Series	PVC Film / Rubber Adhesive	0.13 mm – 0.20 mm	Typically for general electrical insulation; verify grade ratings	Wire harnessing, cable wrapping, electrical insulation
Foam Single-Sided Tape	STK Foam Series	PE / PU Foam with Single-Sided PSA	0.5 mm – 5.0 mm	Grade-dependent	Cushioning, sealing, vibration damping, gap filling
Protective Film Tape	STK Surface Protection Series	PE or PET Film / Removable Acrylic Adhesive	0.03 mm – 0.15 mm	Application-dependent	Metal, plastic, glass, and painted surface protection

Packaging and Shipping

Packaging

Inner packaging is plastic bags, outer packaging is cartons, and can also be packaged according to customer requirements.

Shipping

Sea or air freight according to your requirements.

FAQ

Q: How do I choose between PET, Polyimide, and PTFE single sided tapes?

A: Choice depends on operating temperature, electrical insulation needs, and surface release requirements. Polyimide tape handles continuous temperatures up to 260°C and provides electrical insulation for electronics and wave soldering. PTFE tape is chosen for non-stick release properties, chemical resistance, and low surface friction up to 260°C. PET tape is standard for moderate-temperature masking (up to 180°C–200°C) during powder coating or anodizing.

Q: What is the difference between continuous-use temperature and peak temperature?

A: Continuous-use temperature is the thermal exposure the tape can endure over extended periods without adhesion degradation or backing breakdown. Short-term peak temperature is the maximum temperature the tape tolerates for brief intervals (e.g., 10 to 30 minutes in a baking oven). Always verify peak temperature alongside dwell time and test methods.

Q: How do you ensure single sided tape leaves no adhesive residue after baking?

A: Clean removal depends on cross-linked adhesive formulations combined with specialized primer coatings applied between the backing film and the adhesive layer. This anchor structure prevents adhesive transfer to the substrate during thermal exposure.

Q: Can STK supply single sided tape pre-cut into custom shapes or die-cut dots?

A: Yes. We manufacture custom die-cut discs, squares, washers, and complex engineered shapes. These can be supplied on continuous rolls or flat sheets with extended release liners (pull-tabs) for easy operator peeling.

Q: What information is needed to receive an accurate quote?

A: Please specify the backing material or required performance, total tape thickness, operating temperature, tape width and length, estimated order quantity, application substrate, and delivery destination. Sharing a drawing or photo is recommended for custom die-cut parts.

Q: Can I request free samples for evaluation before bulk production?

A: Yes. STK provides sample rolls or die-cut sample pieces for testing on your production line.

Q: What are the standard MOQ and lead times for slitting and die-cutting?

A: For stocked branded master rolls, slitting MOQ starts at 5-10 rolls. Custom die-cutting MOQ depends on part dimensions and tooling. Standard slitting lead time is 3-5 working days; custom die-cut tooling and sampling take 5-7 working days.

Q: What is the difference between continuous operating temperature and peak temperature?

A: Continuous temperature is the maximum heat the tape withstands over long-term operation without bond degradation. Short-term peak temperature refers to brief exposure durations (such as paint curing ovens or reflow soldering) where the tape retains integrity.

Q: Are TDS, MSDS, and RoHS compliance documents available before ordering?

A: Yes. Technical Data Sheets, UL Yellow Cards, Material Safety Data Sheets, and RoHS/REACH declarations can be requested or downloaded directly from individual product pages.

Q: What information is required to receive an accurate quote?

A: Please provide: brand part number (or material spec), width & length (or CAD drawing), substrate material, estimated volume, and destination country.

STK manufactures and converts industrial single sided adhesive tapes using Polyester (PET), Polyimide, PTFE, Aluminum Foil, Cloth, Glass Cloth, and Crepe Paper backings paired with engineered Acrylic, Silicone, or Rubber adhesive systems. Designed for applications across electronics, automotive, electrical, HVAC, construction, packaging, aerospace, and general industrial manufacturing, our single sided adhesive tapes can be supplied in standard rolls, jumbo rolls, slit rolls, and precision die-cut parts. Send us your requirements, part number, dimensions, and application for a fast sample and quotation.

Get a Quote & Request a Sample

Send requirements, substrate, width, quantity, and CAD drawing for rapid review.

We're professional single side tape manufacturers and suppliers in China, specialized in providing high quality products and service. We warmly welcome you to wholesale customized single side tape from our factory.