PE Coated Cloth Duct Tape | Single Side Duct Tape | Industrial Repair, Packaging, Waterproof & Sealing

PE Coated Cloth Duct Tape | Single Side Duct Tape | Industrial Repair, Packaging, Waterproof & Sealing
Details:
ource factory-direct PE coated cloth duct tape. 0.22mm thick, ultra-sticky, waterproof fabric masking tape for industrial bundling, pipe sealing, and carpet fixing. Bulk pricing.
Send Inquiry
Description
Send Inquiry
product-474-474

PE Coated Cloth Duct Tape | 0.22mm Heavy-Duty Waterproof Fabric Tape for HVAC Repair & Heavy Packing - STK

 

STK's Industrial PE Coated Cloth Duct Tape is the ultimate heavy-duty multi-purpose tool used across warehouses, construction sites, and shipping lines worldwide. It features a strong woven fabric mesh core sandwiched tightly between an outer, 100% waterproof polyethylene (PE) glossy protective shell and a thick, aggressive high-tack adhesive lining.
Unlike cheap consumer tapes that use thin, low-density threads that sag and stretch under weight, our duct tape acts like a flexible strapping band. It grabs instantly to uneven bricks, wood crates, and rusty iron pipes, providing a permanent water-tight hold while remaining surprisingly easy for workers to snap off cleanly by hand.
Our Factory Density Promise : To cut costs, many suppliers sell low-mesh tapes that break or tear diagonally. STK guarantees high-density fabric weaving patterns with synchronized PE film heat-lamination. It will never separate, never stretch out of shape, and never snap under normal heavy cargo pulling tension.

Practical Everyday Benefits

 

 

If your team is sealing ventilation pipes, binding heavy wooden pallets, or securing exhibition flooring, using weak stationery tapes will waste labor hours. Here is why our PE cloth tape gets the job done:

 

Destructive Instant Grab: The thick, high-tack adhesive padding flows effortlessly into rough, dusty, and uneven surfaces. It bites immediately onto bare concrete walls, coarse fabrics, and smooth metals without slipping.

 

100% Moisture & Waterproof Shield: The heavy-duty PE top layer blocks out water mud, rain, humidity, and damp indoor environments. It keeps its strong grip perfectly intact even when completely exposed to moisture or wet pipe wrapping.

 

Perfect Hand-Tearable Utility: Your workers can leave their scissors and knives behind. Despite its immense vertical pull strength, the tape can be torn across with a quick finger snap, creating straight, clean borders that slash assembly time.

 

Zero Structural Sagging: Thanks to our high-mesh cloth matrix, this tape limits mechanical stretching. When used to bundle heavy steel bars or secure shifting cargo boxes, it won't yield, creep, or let the bundle loosen during transit.

 

Technical Specifications & Grade Options

 

 

Technical Property

Standard Utility Grade

Heavy-Duty Industrial Grade

Test Method / Notes

Backing Structure

PE-Coated Cotton/Polyester Cloth

PE-Coated Cotton/Polyester Cloth

Waterproof polyethylene extrusion

Mesh Count

27–35 Mesh

50–70 Mesh

Threads per square inch

Total Thickness

0.16–0.18 mm (6.3–7.1 mil)

0.22–0.30 mm (8.7–11.8 mil)

ASTM D3652

Adhesive Type

Synthetic Rubber (Hot-Melt)

Natural Rubber / Cross-linked Rubber

High initial tack

Adhesion to Steel

≥10 N/25 mm (36 oz/in)

≥14 N/25 mm (50 oz/in)

ASTM D3330

Tensile Strength

≥65 N/25 mm (15 lbs/in)

≥110 N/25 mm (25 lbs/in)

ASTM D3759

Elongation at Break

12%–18%

10%–15%

ASTM D3759

Service Temperature

-10°C to +60°C (14°F to 140°F)

-20°C to +80°C (-4°F to 176°F)

Continuous indoor/outdoor use

Standard Colors

Silver, Black, White, Red, Yellow, Blue, Green

Silver, Black, Olive Drab, Grey

Custom Pantone matching available

 

Construction & Manufacturing Facts

 

 

Extruded PE Moisture Barrier: The woven cotton-polyester scrim is extrusion-coated with low-density polyethylene (LDPE), forming a waterproof surface that resists moisture, humidity, and abrasion.

 

Straight Hand-Tearability: Balanced warp-and-weft fabric construction allows clean, straight cross-direction tearing by hand without curling, twisting, or stringing during field installation.

 

High-Tack Adhesive Formulation: Coated with a high-viscosity rubber adhesive engineered to wet out and bond immediately to rough, uneven, or dusty surfaces including concrete, wood, galvanized sheet metal, and PE sheeting.

 

Controlled Unwind Tension: Calibrated release coating on the PE top layer ensures smooth, consistent unwind force without adhesive transfer or delamination on high-speed dispensing.

 

Application

 

 

HVAC & Ductwork Sealing: Sealing joints and seams on flexible air ducts, sheet metal plenums, and fiberglass insulation wraps in commercial and residential construction.

 

Heavy-Duty Packaging & Bundling: Reinforcing corrugated cartons for heavy export shipments, bundling steel pipes, rebar, and construction conduits.

 

Surface Protection & Masking: Temporary protective masking during sandblasting, concrete pouring, marine hull maintenance, and automotive assembly.

 

Event & Stage Rigging (Matte / Gaffer Variants): Securing electrical cables, temporary floor coverings, and stage carpets with low-residue natural rubber formulations.

 

STK Manufacturing & OEM Capabilities

 

STK operates integrated PE extrusion coating, rubber adhesive coating, and automated slitting lines for direct bulk supply and private-label programs:

Jumbo Logs & Custom Slitting: Standard jumbo logs supplied at 1020 mm / 1060 mm × 1000 m; precision-slit to finished roll widths from 12 mm to 100 mm (48 mm / 50 mm standard) and lengths from 10 m to 50 m.

Private Label & OEM Packaging: Custom printed paper cores (inside core branding), individual shrink-wrapping with barcode labels, color-coded master cartons, and retail-ready display boxes.

In-House Quality Control: Every production batch is tested for coating weight uniformity, 180° peel adhesion, holding power (shear resistance), and unwind tension prior to shipment.

 

Ordering & Logistics Information

 

 

Minimum Order Quantity (MOQ): 1 pallet for standard stock colors/sizes; 1,000–3,000 rolls (depending on width) for custom-printed cores and Pantone-matched colors.

 

Lead Time: 7–10 working days for standard silver/black stock; 15–20 working days for custom OEM packaging.

 

Compliance: RoHS and REACH compliant; Technical Data Sheets (TDS) and Material Safety Data Sheets (MSDS) supplied with every shipment.

 

Equipment

 

 

product-410-257
product-410-257
product-410-257
product-411-257

 

Hot Tags: pe coated cloth duct tape | single side duct tape | industrial repair, packaging, waterproof & sealing, China pe coated cloth duct tape | single side duct tape | industrial repair, packaging, waterproof & sealing manufacturers, suppliers, factory, Packaging and Sealing Tape, PE Coated Cloth Duct Tape, Industrial Sealing Cloth Tape, Waterproof Duct Tape, Heavy Duty Repair Tape, duct tape

Send Inquiry
Looking for the Right Adhesive Tape Solution?
Tell us about your materials, specifications and application requirements. Our team will help identify the right solution for your project.