
3M Scotch 2228 Rubber Mastic Tape is a thick, conformable electrical insulating and sealing tape consisting of an ethylene propylene rubber (EPR) backing coated with an aggressive, temperature-stable rubber mastic adhesive.
Its 1.65 mm (65 mil) construction provides rapid insulation build-up and padding over irregular cable connections, lugs, bus bars and other electrical components. The self-fusing construction forms a continuous insulating layer when applied in overlapping wraps.
Scotch 2228 is used for primary electrical insulation on cable and wire connections rated up to 1,000 V, as well as specified bus bar applications rated up to 35 kV. Other applications include moisture sealing around cable connections, service drops, ground wire connections and power cable jackets.
The tape is compatible with solid dielectric cable insulation materials and provides resistance to moisture, ozone and UV exposure for indoor and weather-exposed outdoor installations.
STK supplies 3M Scotch 2228 in roll form and provides custom slitting according to required widths and roll lengths. Application details, electrical requirements and converting dimensions can be reviewed before quotation.
Performance Features
EPR Rubber Backing
The ethylene propylene rubber backing provides flexibility and conformability around cable jackets, connectors, lugs and irregular electrical assemblies. It accommodates uneven surfaces and helps maintain contact during wrapping.
Rubber Mastic Adhesive
The aggressive rubber mastic adhesive provides adhesion to copper, aluminum, polyethylene and power cable jacket materials. Its sealing characteristics help limit moisture entry around electrical connections and cable terminations.
Self-Fusing Construction
The tape fuses to itself when applied in overlapping layers. This creates a continuous insulating and sealing layer without a separate heat-activation process. Follow the manufacturer's wrapping and stretching instructions to achieve the required seal.
1.65 mm Insulation Build-Up
The 65 mil thickness provides insulation build-up with fewer wrapping layers than thinner electrical tapes. It also provides padding over irregular connections and bolted bus bar assemblies.
Electrical Insulation Performance
The manufacturer's application data identifies Scotch 2228 for primary insulation of cable and wire connections up to 1,000 V and specified bus bar connections up to 35 kV. Voltage suitability must be assessed according to the complete electrical assembly, applicable standards and installation design.
Moisture and Weather Resistance
The tape offers resistance to moisture, ozone and UV exposure. It is suitable for indoor and weather-exposed outdoor electrical sealing applications when installed according to 3M instructions.
Mechanical Protection
Scotch 2228 can provide padding and vibration protection around motor leads and irregular electrical connections. For additional mechanical protection, 3M recommends an overwrap of two half-lapped layers of Scotch Super 33+ vinyl electrical tape.
Technical Specifications Reference
|
Technical Parameter |
Specification / Typical Value |
|
Product |
3M™ Scotch® 2228 Rubber Mastic Tape |
|
Backing Material |
Ethylene Propylene Rubber (EPR) |
|
Adhesive Type |
Rubber Mastic |
|
Color |
Black |
|
Total Thickness |
1.65 mm (65 mil) |
|
Temperature Rating (ASTM D-4388) |
90°C (194°F) |
|
Adhesion to Steel (ASTM D-1000) |
26.2 N/10 mm |
|
Adhesion to Polyethylene (ASTM D-1000) |
17.5 N/10 mm |
|
Fusion (ASTM D-4388, Type I) |
Pass |
|
Tensile Strength (ASTM D-4325) |
1.03 N/mm² |
|
Elongation at Break (ASTM D-4325) |
1000% |
|
Dielectric Breakdown, Dry (ASTM D-4325) |
19.7 kV/mm |
|
Dielectric Breakdown, Wet (ASTM D-4325) |
19.7 kV/mm |
|
Dielectric Constant (ASTM D-4325) |
3.5 |
|
Dissipation Factor (ASTM D-4325) |
1.0% |
|
Water Absorption (ASTM D-570) |
0.15% |
|
Water Vapor Transmission Rate (ASTM D-3833) |
0.1 g/64.5 cm²/24 h |
|
Ozone Resistance (ASTM D-3833) |
Pass |
|
Heat Resistance (ASTM D-4388) |
Pass, 130°C |
|
UV Resistance (ASTM D-4388) |
Pass |
Primary Industrial Application Fields
Cable and Wire Connection Insulation
Primary electrical insulation for cable splices and wire connections rated up to 1,000 V. The thick rubber construction conforms around connectors and irregular joint profiles.
Bus Bar Connection Insulation
Insulation and padding for bolted bus bar connections, including the specific 35 kV application referenced in 3M drawing 2047B-106. Confirm the assembly design and applicable electrical requirements before material selection.
Motor Lead Insulation and Vibration Padding
Padding and insulation around motor leads rated up to 1,000 V. The conformable backing accommodates irregular connection shapes and helps provide additional material build-up.
Cable Jacket and Service Drop Sealing
Moisture sealing around power cable jackets, service drops and cable connections exposed to outdoor conditions.
Ground Wire and Ground Rod Connections
Sealing around ground wire and rod connections to help reduce moisture exposure at connection points.
Outdoor Electrical Connections
Use on weather-exposed electrical assemblies where moisture and UV resistance are required. Installation method and overwrap requirements should follow the manufacturer's instructions.


Custom Width Slitting
Standard and non-standard roll widths.
Custom roll lengths according to installation and dispensing requirements.
Core dimensions subject to available material and production configuration.
Edge condition and winding alignment inspection.
Roll Configuration
Individual rolls or bulk roll packaging.
Custom carton quantities and labeling.
Core size and winding requirements confirmed before production.
Packaging suitable for export transportation and warehouse handling.
Quality Inspection
Converted rolls can be inspected for:
Roll width and length.
Thickness and visible surface condition.
Edge alignment and winding consistency.
Core condition and packaging quantity.

Our factory & Equipment






Custom Adhesive Tape Solutions
We provide comprehensive adhesive tape customization and converting services, including custom thickness, size, core, packaging, release liners, and die-cutting solutions to meet your specific application requirements.

Custom Thickness
Custom thickness of adhesive tape is available according to customer's request.

Custom Size
Custom width/length of adhesive tape is available according to customer's request.

Custom Core
Custom core diameter of adhesive tape is available according to customer's request.

Custom Package
Custom package of adhesive tape is available according to customer's request.

Custom liner
Adhesive tape with release liner is available according to customer's request.

Die-cut Service
Die-cutting of adhesive tape is available according to customer's request.
Manufacturing & Delivery Process

Coating Adhesive

Rewinding Roll

Cutting Roll

Quality Inspection

Roll Packing

Delivery
Hot Tags: 3m 2228 rubber mastic tape — high-performance insulation & sealing for electrical and industrial applications, China 3m 2228 rubber mastic tape — high-performance insulation & sealing for electrical and industrial applications manufacturers, suppliers, factory, Double Coated Tape, Industrial Adhesive, double sided bonding tape, 3M 467MP transfer tape, Dimensional Stability, 3m tape










