
3M 9490LE is a differential double coated polyester tape featuring two different acrylic adhesive systems on a clear PET film carrier. One side uses 3M 300MP adhesive for bonding foam and fabric materials, while the other side uses 3M 300LSE adhesive for applications involving low-surface-energy plastics and other challenging substrates.
The polyester carrier provides dimensional stability and supports tape handling during converting operations. With a nominal total thickness of 0.17 mm (6.7 mil), excluding the release liner, 9490LE is suitable for applications requiring a thin double-sided bonding construction with different adhesive properties on each side.
STK Tape supplies adhesive tape materials in roll formats and offers custom slitting and die-cutting solutions according to project requirements. Customers can provide their required dimensions, drawings or samples for application and converting evaluation.
Performance Features
Differential Adhesive System
The two adhesive surfaces are formulated for different bonding requirements. The 300MP faceside is suitable for selected foam and fabric materials, while the 300LSE backside is designed to provide adhesion to many low-surface-energy plastics, including polypropylene, and powder-coated surfaces.
Clear PET Film Carrier
The 0.013 mm polyester carrier helps maintain dimensional stability and supports handling during slitting and die-cutting. It also helps maintain the tape construction when bonding foam and other flexible materials.
Bonding to Low-Surface-Energy Plastics
The 300LSE adhesive side is suitable for bonding to many low-surface-energy plastics and selected coated surfaces. Actual adhesion depends on the substrate grade, surface condition, contact pressure and bonding environment.
Moisture-Resistant Release Liner
The tan polycoated kraft liner provides moisture resistance and helps reduce wrinkling under high-humidity conditions. This supports material handling and storage before application.
Suitable for Custom Tape Conversion
The PET carrier supports slitting and die-cutting processes for converting the tape into application-specific widths and shapes. Converted part feasibility depends on the drawing, dimensions, material orientation and production requirements.
Technical Specifications Reference
|
Property |
Typical Value |
|
Product Type |
Differential Double Coated Tape |
|
Faceside Adhesive |
3M Acrylic Adhesive 300MP |
|
Backside Adhesive |
3M Acrylic Adhesive 300LSE |
|
Carrier |
Clear Polyester (PET) |
|
Faceside Adhesive Thickness |
0.071 mm (2.8 mil) |
|
PET Carrier Thickness |
0.013 mm (0.5 mil) |
|
Backside Adhesive Thickness |
0.086 mm (3.4 mil) |
|
Total Tape Thickness (excluding liner) |
0.17 mm (6.7 mil) |
|
Release Liner |
Tan, 58 lb Polycoated Kraft |
|
Release Liner Thickness |
0.11 mm (4.2 mil) |
|
Liner Print |
3M 300LSE |
|
Test Property |
Test Condition |
Faceside / Backside |
|
90° Peel Adhesion to Stainless Steel |
15 min at room temperature |
2.7 / 6.6 N/cm |
|
90° Peel Adhesion to Stainless Steel |
72 hr at room temperature |
13.7 / 15.3 N/cm |
|
90° Peel Adhesion to Stainless Steel |
72 hr at 70°C |
13.7 / 17.5 N/cm |
|
180° Peel Adhesion to Stainless Steel |
72 hr at room temperature, 2 mil aluminum foil backing |
14.8 / 17.0 N/cm |
|
Static Shear |
1,000 g at 22°C, 0.5 in² sample |
Over 10,000 min |
|
Static Shear |
500 g at 70°C, 0.5 in² sample |
Over 10,000 min |
|
Long-Term Temperature Resistance |
Days or weeks |
93°C |
|
Short-Term Temperature Resistance |
Minutes or hours |
149°C |
|
Dielectric Strength |
Typical value |
1,025 V/mil |
|
Breakdown Voltage |
Typical value |
5,700 V |
FS refers to the faceside adhesive (300MP), located on the interior of the roll.
BS refers to the backside adhesive (300LSE), located on the exterior of the roll.
Peel adhesion values are based on the test methods and conditions stated in the original 3M technical data.
Temperature ranges are relative operating guidelines, not guaranteed continuous-use ratings.
Actual performance depends on substrate materials, surface preparation, application pressure, dwell time and operating conditions.
Confirm the current technical documentation and actual supplied product version before final engineering approval.
Primary Industrial Application Fields
3M 9490LE can be used in applications where different adhesive properties are required on the two bonding surfaces.
Typical application areas include:
Foam Attachment: Bonding selected foam materials to metal or plastic components.
Fabric Bonding: Attaching fabric materials to selected substrates in industrial and electronic assemblies.
Low-Surface-Energy Plastic Bonding: Bonding polypropylene and other compatible plastic components using the 300LSE adhesive side.
Electronic Assembly: Attaching foam pads, cushioning materials and selected internal components.
Graphic and Component Mounting: Bonding decorative films, nameplates and selected components to different surface types.
Substrate compatibility should be confirmed through testing with the actual material, surface finish and application conditions.


STK Tape provides custom tape converting solutions for industrial bonding and assembly applications. 3M 9490LE can be evaluated for conversion into different roll widths and die-cut shapes according to customer drawings and application requirements.
Available converting options include:
Custom Slitting: Narrow rolls converted to specified widths.
Custom Die-Cutting: Custom shapes and adhesive components based on drawings or physical samples.
Custom Dimensions: Part sizes, roll widths and lengths reviewed according to project requirements.
Liner Orientation: Faceside and backside adhesive orientation confirmed before converting.
Application-Based Evaluation: Material and converting feasibility reviewed according to substrate, bonding area and assembly process.
For die-cut parts, please identify which adhesive side will contact each substrate. The 300MP and 300LSE sides have different bonding characteristics and should not be treated as interchangeable.

Our factory & Equipment






Custom Adhesive Tape Solutions
We provide comprehensive adhesive tape customization and converting services, including custom thickness, size, core, packaging, release liners, and die-cutting solutions to meet your specific application requirements.

Custom Thickness
Custom thickness of adhesive tape is available according to customer's request.

Custom Size
Custom width/length of adhesive tape is available according to customer's request.

Custom Core
Custom core diameter of adhesive tape is available according to customer's request.

Custom Package
Custom package of adhesive tape is available according to customer's request.

Custom liner
Adhesive tape with release liner is available according to customer's request.

Die-cut Service
Die-cutting of adhesive tape is available according to customer's request.
Manufacturing & Delivery Process

Coating Adhesive

Rewinding Roll

Cutting Roll

Quality Inspection

Roll Packing

Delivery
Hot Tags: 3m™ 9490le double coated tissue tape for electronics product assembly and repair services, China 3m™ 9490le double coated tissue tape for electronics product assembly and repair services manufacturers, suppliers, factory, Double Coated Tape, Industrial Adhesive, double sided bonding tape, 3M 467MP transfer tape, Dimensional Stability, 3m tape










