
STK Tape supplies genuine 3M™ 8004PT Double Coated PET Tape, specifically engineered for Optically Clear & Electronic Display Bonding and precision micro-gap electronic component assembly.
Featuring an ultra-thin 0.04 mm (1.57 mils / 39 µm) total thickness profile, 3M 8004PT consists of a clear Polyester (PET) film carrier coated on both sides with a high-transparency, medium-firm acrylic pressure-sensitive adhesive system. Protected by a high-purity blue PET or printed SCK release liner, this tape provides superior optical clarity, minimal thickness variation, and exceptional dimensional stability required for high-precision rotary and flatbed die-cutting.
Engineered to meet the stringent demands of flat panel display manufacturing and handheld mobile electronics, 3M 8004PT enables seamless optical film attachment, foam gasket fixing, and insulation sheet lamination without adding structural bulk.
Performance Features
Optically Clear & Electronic Display Bonding: High light transmission and optical clarity prevent visual distortion, making it ideal for bonding display modules, touch panel layers, and optical management films (BEF, DBEF, diffuser sheets).
Ultra-Thin 0.04 mm Profile: Meets modern compact hardware requirements by providing high bonding strength in tight spatial clearances where standard double-coated tapes are too thick.
Excellent Reworkability & Clean Removal: Formulated with a medium-firm acrylic adhesive that facilitates clean peel-off during module rework, leaving zero residual adhesive on delicate optical films or plastic bezels.
Dimensional Stability for Precision Converting: The tough PET carrier prevents tape stretching and edge deformation during high-speed slitting, kiss-cutting, and automated pick-and-place assembly.
Broad Substrate Adhesion & Environmental Resistance: Delivers high shear holding power and peel strength to metals, glass, polycarbonate (PC), and acrylic (PMMA). Demonstrates good resistance to UV light, thermal cycling, and chemical solvents.
TDS
|
Technical Parameter |
Specification Value |
|
Product Model |
3M™ 8004PT |
|
Adhesive Type |
Medium-Firm High Clarity Acrylic Pressure Sensitive Adhesive |
|
Carrier (Backing) Material |
Transparent Polyester (PET) Film (0.013 mm / 0.5 mil) |
|
Faceside Adhesive Thickness |
0.013 mm (0.5 mil) |
|
Backside Adhesive Thickness |
0.013 mm (0.5 mil) |
|
Total Tape Thickness (excl. liner) |
0.04 mm (0.039 mm / 1.57 mils) |
|
Tape Color |
Transparent / Clear |
|
Release Liner Type |
Blue PET Film or SCK Paper Liner |
|
Standard Master Roll Size |
1200 mm Width × 50 m Length |
|
Available Slitting Widths |
1 mm to 1200 mm (Custom Slitting) |
|
Long-Term Temperature Resistance |
121°C (250°F) |
|
Short-Term Temperature Resistance |
149°C (300°F) |
Application
Electronic Display & Optical Module Assembly: Direct bonding of optical management films, diffuser sheets, brightness enhancement films (BEF), and light guide plates (LGP) inside display modules.
Touch Panel & Lens Mounting: Border bonding and window gap sealing for handheld devices, wearables, medical monitors, and automotive display clusters.
Gasket & Insulation Sheet Lamination: Permanent positioning of thin PORON polyurethane foam, Polycarbonate (PC) films, and Formex insulation sheets onto electronic metal frames.
System Assembly & General Electronics: Fixing flexible printed circuit (FPC) stiffeners, nameplates, and internal shielding foils where ultra-thin bond lines are required.

STK Tape provides full technical converting capabilities for 3M 8004PT:
• Micro-Slitting: Custom narrow roll slitting down to 1 mm widths on standard 3-inch cores.
• Precision Die-Cut Parts: Rotary and flatbed die-cutting into frame gaskets, window shapes, and custom geometries with extended pull-tabs for rapid manual or automated placement.
• Cleanroom Converting: Processed under cleanroom environments to maintain surface purity and eliminate dust contamination on optical surfaces.

Our factory & Equipment






Custom Adhesive Tape Solutions
We provide comprehensive adhesive tape customization and converting services, including custom thickness, size, core, packaging, release liners, and die-cutting solutions to meet your specific application requirements.

Custom Thickness
Custom thickness of adhesive tape is available according to customer's request.

Custom Size
Custom width/length of adhesive tape is available according to customer's request.

Custom Core
Custom core diameter of adhesive tape is available according to customer's request.

Custom Package
Custom package of adhesive tape is available according to customer's request.

Custom liner
Adhesive tape with release liner is available according to customer's request.

Die-cut Service
Die-cutting of adhesive tape is available according to customer's request.
Manufacturing & Delivery Process

Coating Adhesive

Rewinding Roll

Cutting Roll

Quality Inspection

Roll Packing

Delivery
Hot Tags: 3m™ 8004pt optically clear double coated pet tape for electronic display bonding, China 3m™ 8004pt optically clear double coated pet tape for electronic display bonding manufacturers, suppliers, factory, 3M Scotch 471 tape, 3M Vinyl Tape 471, Automotive Trim Tape, die cut double coated tape, edge lifting resistant adhesive, Low voltage cable repair tape










