
Rogers PORON 4701-40 Polyurethane Foam | Soft High-Bounce Dust-Proof Sealing Gasket Material - Genuine Rogers - STK
STK's Genuine Rogers PORON 4701-40 is a high-performance, soft double-sided microcellular polyurethane foam. It is packed with millions of microscopic, tightly sealed air cells that act like tiny, indestructible springs.
Unlike cheap packaging foams that flatten out and break apart after a few weeks, PORON 4701-40 is engineered for long-term sealing and shock protection. It stays flexible, pushes back with just the right amount of support, and provides a perfect, lifetime barrier against dust, vibration, and light moisture inside electronic devices and electric panels.
Our Fresh Stock Promise : Polyurethane foams must be kept fresh to maintain their amazing bounce-back power. We store all original Rogers PORON 4701-40 logs inside our temperature-regulated, clean warehouse. We guarantee 100% genuine brand lineage with no dried-out or aged stock.
Practical Benefits
If you are designing outdoor electrical boxes, handheld devices, or automotive display screens, weak foam will let dust destroy your circuits. Here is why PORON 4701-40 is the perfect choice:
Never Stays Flattened (Amazing Bounce-Back): This is its biggest superpower. Even if you compress this foam inside a tightly closed door or frame for years, it will bounce back to its original thickness the moment you open it, ensuring the seal never fails.
Blocks 100% Dust & Damp Air: It forms an airtight wall. When compressed slightly, it squishes into uneven metal or plastic gaps perfectly, keeping fine dust, dirt, and air moisture completely outside your sensitive machine.
No Crumbling or Powdering: Cheap foams rot and turn into annoying sticky powder after a while, ruining your optics or screens. PORON 4701-40 is incredibly clean, tough, and will not peel or flake apart over time.
Safeguards Screens from Drops: It absorbs impacts beautifully. When a device gets dropped or undergoes continuous machine shaking, the soft foam matrix catches the vibration, saving glass displays and camera modules from cracking.
TDS
|
PROPERTY |
TEST METHOD |
VALUE |
|
PHYSICAL |
||
|
Density, kg /m³ (lb. / ft³) |
ASTM D3574-95, Test A |
240 (15) |
|
Tolerance, % |
± 10 |
|
|
Thickness, mm |
1.4 – 3.0 |
|
|
Tolerance, % |
± 10 |
|
|
Standard Color (Code) |
Black (04) |
|
|
Compression Force Deflection, |
0.51 cm/min (0.2"/min). Strain Rate |
27 – 55 (4.0 - 8.0) |
|
Typical kPa (psi) |
Force Measured @ 20% Deflection |
40.6 (5.9) |
|
Force Measured @ 25% Deflection |
44.5 (6.5) |
|
|
Force Measured @ 30% Deflection |
49.1 (7.1) |
|
|
Force Measured @ 40% Deflection |
60.8 (8.8) |
|
|
Force Measured @ 50% Deflection |
81.5 (11.8) |
|
|
Force Measured @ 60% Deflection |
127 (18.5) |
|
|
Force Measured @ 70% Deflection |
264 (38.4) |
|
|
Hardness, Durometer, Shore O |
ASTM D2240-97 |
12 |
|
Shore A |
8 |
|
|
Compression Set, % max. |
ASTM D3574-95 Test D @ 23°C (73°F) |
5 |
|
ASTM D3574-95 Test D @ 70°C (158°F) |
10 |
|
|
ASTM D3574-95 Test J/Test D |
5 |
|
|
Dimensional Stability, % max. change |
22 hrs @ 80°C (176°F) in a Forced-Air Oven |
± 1 |
|
Tensile Strength, min. kPa, (psi) |
ASTM D3574-75 Test E |
276 (40) |
|
Tensile Elongation, % min., |
ASTM D3574-75 Test E |
100 |
|
Tear Strength, kN/m (pli) min |
ASTM D264-91 Die C |
0.5 (3) |
|
ELECTRICAL AND THERMAL |
||
|
Dielectric Constant, K' ("DK") |
ASTM D150 Measurements at 22°C (72°F) |
1.71 |
|
Dielectric Strength, kN/m (volts/mil) |
ASTM D149-97a |
1969 (50) |
|
Dissipation Factor, tan D ("DF") |
ASTM D150-98 |
0.05 |
|
Volume Resistivity, ohm-cm (ohm-in) |
ASTM D257-99 |
1 x 10¹² |
Application:
Handheld Electronic Enclosures: Providing a protective dust and shock-absorption gasket around the screens of rugged smartphones, medical tablets, and barcodes scanners.
Automotive Screen & Dash Pads: Sealing the gap behind curved car navigation displays to stop annoying squeaks and rattles.
Electrical Control Box Door Gaskets: Lining the inside doors of industrial control switchgears and outdoor battery cabinets to keep rainwater and dust out.
Acoustic & Speaker Isolators: Wrapping around small speakers and microphones inside smart devices to block sound leaks and wind noise.
STK Workshop Services
STK is a direct industrial materials factory converter. We deliver PORON 4701-40 in the exact format your production line needs:
Tape Lamination (Pre-Applied Glue): Original PORON foam doesn't have glue. We can laminate high-grade 3M or TESA double-sided tapes onto the foam backing inside our cleanroom so it arrives ready to peel-and-stick.
High-Speed Precision Die-Cutting: Do you need tiny hollow frames, thin strips, or complex circular washers? We use automated CNC stamping machines to cut the foam into your exact blueprint shapes with laser-sharp edges.
Direct Wholesale Tier Pricing: Cut out unnecessary local trading markups. We provide direct container-ready tiered wholesale quotes to keep your manufacturing bill of materials (BOM) highly competitive.

Equipment




Hot Tags: poron 4701-40 pu foam | electrical insulation & cushioning material | high performance shock absorbing foam, China poron 4701-40 pu foam | electrical insulation & cushioning material | high performance shock absorbing foam manufacturers, suppliers, factory, Poron 4701 40, Cushioning Foam Gasket, Electronic Device Sealing Foam, poron foam, Battery Insulation and Cushioning Foam, Shock Absorbing Foam Material










