
Genuine Nitto 903UL PTFE Film Tape | Ultra-Smooth Heat-Resistant Insulation - Nitto Denko - STK
STK's Genuine Nitto 903UL PTFE Film Tape is a premium, ultra-smooth electrical insulation and chemical masking solution manufactured from a single-layer, non-reinforced pure polytetrafluoroethylene (PTFE) film backing, integrated with a high-temperature thermosetting silicone adhesive.
Unlike fiberglass-reinforced tapes (such as Nitto 973UL) which are rigid and resistant to bending, the non-woven, unbacked core of Nitto 903UL yields exceptional physical conformability and elastic elongation. This unique flexibility allows the tape to stretch and mold flawlessly around severe contours, sharp micro-components, and tightly wound wire profiles without creating spatial voids or stretch-induced fractures.
Request Nitto 903UL Factory Wholesale & Tiered Contract Pricing
TDS
|
Property |
Unit |
No.903UL |
|||
|
Thickness |
mm |
0.08 |
0.13 |
0.18 |
0.23 |
|
Thickness |
mil |
3.1 |
5.2 |
7.1 |
9.1 |
|
Tensile strength |
N/19mm |
55 |
93 |
160 |
210 |
|
Adhesive strength*1 |
N/19mm |
5.6 |
7.1 |
7.4 |
8.7 |
|
Rewinding force |
N/19mm |
4.4 |
5.8 |
7.1 |
8.9 |
|
Tensile strength |
oz/in |
264 |
447 |
769 |
1009 |
|
Adhesive strength*1 |
oz/in |
27 |
34 |
36 |
42 |
|
Rewinding force |
oz/in |
21 |
28 |
34 |
43 |
|
Breakdown voltage |
kV |
8 |
11 |
14 |
15 |
|
Breakdown voltage |
V |
8000 |
11000 |
14000 |
15000 |
|
Temperature range |
°C |
-60~200°C |
|||
|
Temperature range |
°F |
-76~392°F |
|||
Engineering Precision: Eliminating Edge-Lifting on Curved Profiles in 250°C Environments
For quality control engineers specifying isolation materials inside high-frequency switching transformers, industrial electroplating baths, or battery tab junctions, the primary failure mode of cheap sub-grade tapes is corner lifting or edge-tunneling when wrapped around curved conductors. This creates catastrophic moisture pathways or short-circuit arcs. STK's authentic Nitto 903UL directly neutralizes these application risks:
Conformable Pure PTFE Backing
Formulated without a rigid structural fabric mesh, the pure PTFE film possesses a soft, pliable yield profile. It wraps smoothly around cylindrical busbars, irregular toroidal cores, and 90-degree angular contacts, achieving a continuous, uniform bond line with absolutely zero edge-lifting or elastic spring-back.
Continuous 250°C Thermal Insulation
The specialized cross-linked silicone adhesive maintains steady adhesion when exposed to continuous operational bakes up to 250°C (482°F), with an intermittent breakdown ceiling of 300°C. It will not carbonize, smoke, or turn brittle inside oil-immersed transformer chambers.
Elite Dielectric & Chemical Defenses
Boasts exceptional chemical inertness, providing resistance to aggressive acids, alkaline electroplating solutions, and a wide range of organic solvents. Its high dielectric breakdown strength (up to 100 kV/mm for the film carrier) ensures reliable phase-to-phase electrical insulation and long-term electrical protection.
Primary High-Technology Application Fields
High-Frequency Transformer Coil Wrapping
Insulating and securing outer boundary layers, core junctions, and terminal wire turnings on compact power electronics switching systems.
01
Industrial Electroplating & Anodizing Masking
Serving as an impermeable, conformable seal over complex structural curves, protecting unplated metallic surfaces from aggressive chemical vapors and acid baths.
02
Lithium Battery Tab & Terminal Insulation
Wrapping exposed positive/negative conductive tabs inside heavy-duty EV battery power pack layouts to shield against micro-shorts.
03
High-Temperature Mold Release & Splicing
Lining continuous heat-press rollers and composite curing trays to facilitate instant, non-stick release of molten polymers and laminates.
04
B2B Factory Supply Capabilities: Full Specification Stocks & Precision Slitting
Industrial manufacturing procurement networks and automated assembly facilities require immediate stock scalability and perfect edge cutting. STK optimizes your component supply chain directly:
Massive Bulk Warehouse Current Stock
We maintain vast, immediate container-ready wholesale stocks across all core Nitto 903UL thickness profiles, specifically including 0.08mm, 0.13mm, and 0.18mm calipers. We support full-pallet global shipments backed by volume-tiered direct-factory pricing structures.
Precision Burr-Free Narrow Slitting
perating automated high-precision log slitting lines, we slice master Nitto logs into any custom millimeter width requirements (e.g., 5mm, 12mm, 19mm, 100mm) with perfectly clean, non-warped edges, preventing outer edge-oozing during high-temperature warehouse storage.
Custom Die-Cut Pieces & Masking Tabs
Send us your engineering drawings. We can precision-stamp pure PTFE tape into customized rectangular sheets, circular washers, or multi-window perimeter masking shapes. These are supplied on high-stability release liners with customized non-adhesive pull-tabs (finger-lifts) to eliminate manual alignment latency on your automated robotic pick-and-place lines.
Equipment




Hot Tags: nitto 903ul ptfe film tape: high-temp masking & flame retardant adhesive solution for industrial applications, China nitto 903ul ptfe film tape: high-temp masking & flame retardant adhesive solution for industrial applications manufacturers, suppliers, factory










