
STK Tape supplies authentic 3M 92, 3M 1205, and 3M 1218 Polyimide Film Tapes, engineered specifically for advanced electrical insulation across transformers, electric motors, and printed circuit board manufacturing. Constructed with an ultra-tough 1.0 mil (0.025 mm) golden Kapton Backing (polyimide film), these technical tapes deliver exceptional physical durability, puncture resistance, and electrical isolation under intense operational heat.
Designed for high-reliability industrial assembly, 3M 92 features a Thermosetting Silicone Adhesive system formulated to meet strict High Temp 155°C-180°C / Silicone Adhesive performance requirements with clean, residue-free removal. Meanwhile, 3M 1205 and 3M 1218 utilize a solvent-resistant Acrylic Pressure Sensitive Adhesive matrix, providing high initial tack, solvent resistance, and mechanical stability across Class F (155°C) and Class H (180°C) operating conditions.
Performance Features
Elite Thermal Endurance & Stability: Retains mechanical integrity, tensile strength, and flexibility across continuous temperature exposures from 155°C up to 180°C (356°F).
High Dielectric Isolation: Delivers a superior Dielectric Breakdown Voltage of up to 7,500 Volts to prevent electrical arcing and short circuits in high-voltage equipment.
Process Protection & Masking: Serves as a golden Amber Polyimide Tape barrier during high-temperature Wave Solder Masking and varnish dipping, shielding sensitive contacts without tape shrinkage or adhesive transfer.
Certified Safety Compliance: Tested and rated as UL510 Flame Retardant to satisfy stringent international safety standards for Class F and Class H electrical systems.
TDS
|
Technical Metric |
3M Polyimide Tape 92 |
3M Polyimide Tape 1205 |
3M Polyimide Tape 1218 |
Testing Standard / Condition |
|
Product Category |
Polyimide Film Tapes |
Polyimide Film Tapes |
Polyimide Film Tapes |
Official 3M Designation |
|
Backing Material |
Kapton Backing (Polyimide) |
Kapton Backing (Polyimide) |
Kapton Backing (Polyimide) |
Golden Amber Film |
|
Backing Thickness |
1.0 mil (0.025 mm) |
1.0 mil (0.025 mm) |
1.0 mil (0.025 mm) |
ASTM D1000 |
|
Total Tape Thickness |
2.75 mil (0.070 mm) |
3.20 mil (0.081 mm) |
3.15 mil (0.080 mm) |
ASTM D1000 |
|
Adhesive System Type |
Thermosetting Silicone Adhesive |
Acrylic Pressure Sensitive Adhesive |
Acrylic Pressure Sensitive Adhesive |
Dual-side pressure sensitive |
|
Operating Temp Range |
-40°C to 180°C (-40°F to 356°F) |
-40°C to 155°C (-40°F to 311°F) |
0°C to 180°C (32°F to 356°F) |
Thermal Class F to H |
|
Temp Class & Adhesive |
High Temp 155°C–180°C / Silicone Adhesive |
High Temp 155°C / Acrylic |
High Temp 180°C / Acrylic |
Continuous operating spec |
|
Dielectric Breakdown Voltage |
7,500 V (6,000 V min) |
7,500 V |
6,000 V (5,500 V min) |
ASTM D1000 |
|
Breaking / Tensile Strength |
53 N/cm (30 lbs/in) |
53 N/cm (30 lbs/in) |
35–53 N/cm (20–30 lbs/in) |
ASTM D1000 |
|
Peel Adhesion (Steel) |
2.0–2.8 N/cm (18–25 oz/in) |
3.8 N/cm (35 oz/in) |
2.1 N/cm (19 oz/in) |
ASTM D1000 |
|
Elongation at Break |
40% to 55% |
55% |
55% |
ASTM D1000 |
|
Insulation Resistance |
> 1,000,000 MΩ (> 1 × 10⁶) |
> 1,000,000 MΩ (> 1 × 10⁶) |
> 1,000,000 MΩ (> 1 × 10⁶) |
ASTM D1000 |
|
Flammability Rating |
UL 510 Flame Retardant |
UL 510 Flame Retardant |
UL 510 Flame Retardant |
UL File E17385 |
Applications
3M 92 Targeted Applications (Silicone Adhesive Profile)
Wave Solder Masking: Temporary masking of gold finger contacts and sensitive printed circuit board areas during automated Wave Solder Masking and reflow ovens.
High Temperature Coil Anchoring: Securing terminal leads and outer wraps on Class H transformers, inductors, and electric motors where zero residue is mandatory.
3M 1205 & 3M 1218 Targeted Applications (Acrylic Adhesive Profile)
Transformer Coil Wrapping: High-dielectric layer-to-layer separation, cross-over insulation, and outer protective wrapping in high-frequency Transformer Coil Wrapping.
Flexible Circuit Coverlay & Grounding: Insulating flexible printed circuits (FPCs), solar panel arrays, and traction motor coils requiring solvent resistance against varnishes.

STK Custom Conversion & Material Supply Services

Precision Log Slitting:
Processing original 3M jumbo master rolls into custom log roll widths (e.g., 3mm, 6mm, 9mm, 12mm, 19mm, 25mm, or custom millimeter sizes) through Precision Log Slitting.

Cleanroom Precision Die-Cutting:
Precision stamping of original 3M 92, 3M 1205, and 3M 1218 tapes into custom insulating washers, circuit masks, and tabbed gaskets via Cleanroom Precision Die-Cutting.

Reliable B2B Direct Inventory:
Maintaining continuous factory stock to support steady OEM transformer and electronics manufacturing worldwide.
Our factory & Equipment






Custom Adhesive Tape Solutions
We provide comprehensive adhesive tape customization and converting services, including custom thickness, size, core, packaging, release liners, and die-cutting solutions to meet your specific application requirements.

Custom Thickness
Custom thickness of adhesive tape is available according to customer's request.

Custom Size
Custom width/length of adhesive tape is available according to customer's request.

Custom Core
Custom core diameter of adhesive tape is available according to customer's request.

Custom Package
Custom package of adhesive tape is available according to customer's request.

Custom liner
Adhesive tape with release liner is available according to customer's request.

Die-cut Service
Die-cutting of adhesive tape is available according to customer's request.
Manufacturing & Delivery Process

Coating Adhesive

Rewinding Roll

Cutting Roll

Quality Inspection

Roll Packing

Delivery
Hot Tags: authentic 3m 92, 1205 & 1218 tapes | high temp 155°c-180°c / silicone adhesive, China authentic 3m 92, 1205 & 1218 tapes | high temp 155°c-180°c / silicone adhesive manufacturers, suppliers, factory, 3m 471 floor tape, 3M Polyimide Film Tape 5413, Aerospace Industry Tape, clear carrier transfer tape, Self fusing rubber splicing tape, Transformer coil insulation Tape










