
Material Construction & Engineering Properties
3M™ 300 Adhesive Formulation: Engineered with high initial tack and rapid surface wet-out, allowing immediate bonding to difficult surfaces without prolonged dwell times.
Textured & Low-Energy Substrate Compatibility: Flows rapidly to laminate textured plastics, flexible polyurethane/EPDM foams, acoustic fabrics, and coated papers that typically resist standard pressure-sensitive adhesives.
High Chemical & UV Resistance: Cured acrylic polymer resists environmental exposure, cleaning solvents, plasticizer migration, and indoor/outdoor UV degradation.
60# Densified Kraft Paper Liner: High-density tan kraft liner provides exceptional tear strength during high-speed rotary die-cutting, automated dispensing, and multi-pass converting.
.
TDS
|
Technical Property |
Metric Value |
Imperial Value |
Test Method / Notes |
|---|---|---|---|
|
Product Number |
3M 9472 |
3M 9472 |
Unsupported adhesive transfer tape |
|
Adhesive Family |
3M™ 300 High-Tack Acrylic |
3M™ 300 High-Tack Acrylic |
High initial adhesion & flow |
|
Carrier / Backing |
None (Unsupported Transfer Film) |
None (Unsupported Transfer Film) |
Pure adhesive film structure |
|
Total Tape Thickness |
0.05 mm (Adhesive only) |
5.12 mil |
Excluding release liner |
|
Primary Liner |
60# Densified Kraft Paper (Tan) |
0.09 mm (3.5 mil) |
Moisture-stable lay-flat liner |
|
Operating Temperature Range |
-40°C to +121°C |
-40°F to +250°F |
Continuous and short-term service |
|
Automotive OEM Specs |
FCA MS-CC240, Ford WSS-M11P62, GM 9985281 |
Certified OEM Specifications |
Tier-1 automotive interior/exterior approval |
|
Shelf Life |
18 Months |
18 Months |
Stored at 22°C (72°F) and 50% RH |
|
Master Width Options |
25.4 mm to 1,219.2 mm |
1 in to 48 in |
Standard factory log widths |
|
Master Length Options |
54.86 m to 329.2 m |
60 yd to 360 yd |
Available in rolls and spools |
Industrial & OEM Applications
Automotive Interior & Trim Assembly: Bonding dashboard components, interior trim, acoustic insulation pads, and anti-rattle gaskets meeting FCA, Ford, and GM material specifications.
Appliance & Equipment Manufacturing: Attaching decorative graphic overlays, control panel bezels, and dampening seals onto metal and plastic housings.
Foam & Gasket Fabrication: Roll-to-roll lamination onto open-cell and closed-cell foams, felts, and non-woven textiles prior to precision die-cutting.
General Industrial Bonding: Large-surface lamination in signage, electronics assembly, point-of-purchase displays, and specialty vehicle manufacturing.
STK stocks master logs of 3M™ 9472 and operates dedicated converting lines tailored for Tier-1 suppliers and industrial manufacturers:
- Precision Width Slitting: Master logs (1219 mm / 48 in) slit to custom roll widths from 6 mm (0.24 in) up to full master width with dimensional tolerances within ±0.15 mm.
- Rotary & Flatbed Die-Cutting: Custom gaskets, pads, and structural bonding parts supplied on rolls or sheets with optional extended finger-lift liners for automated assembly.
- Wide-Web Lamination: Roll-to-roll adhesive lamination of 3M™ 9472 onto customer-supplied foams, rubbers, and films up to 1,200 mm wide.

Quality Control & Logistics
Traceability
Full 3M™ master roll lot traceability printed on inner cores; Certificate of Conformance (CoC) and automotive compliance certificates supplied upon request.
Packaging Protection
Slit rolls individually bagged or partitioned in heavy-duty corrugated cartons to prevent edge damage and moisture contamination during global transit.
Hot Tags: 3m™ adhesive transfer tape 9472 | high-performance bonding for textured and lse surfaces, China 3m™ adhesive transfer tape 9472 | high-performance bonding for textured and lse surfaces manufacturers, suppliers, factory, Double Coated Tape, Industrial Adhesive, double sided bonding tape, 3M 467MP transfer tape, Dimensional Stability, 3m tape










