
Formex GL is a flame-retardant polypropylene electrical insulation material supplied by ITW Formex. The GL series includes thin-gauge grades for electrical insulation, component separation and protective barriers in electronic and electrical assemblies.
Available grades include GL-10, GL-17, GL-26 and GL-30, with nominal thicknesses ranging from 0.25 mm to 0.76 mm. Natural and black color options are specified in the manufacturer's product data. Each grade has its own UL 94 flammability classification and electrical performance values, allowing material selection according to the required insulation thickness and component design.
Formex GL combines electrical insulation properties with low water absorption and sheet flexibility. The material can be converted into insulating barriers, covers, partitions and formed components through die-cutting, scoring and folding, subject to the required geometry and material thickness.
STK supplies Formex GL materials and provides custom converting services for industrial insulation components. Material grade, thickness, color, dimensions and processing requirements can be reviewed before quotation and production.
Performance Features
Flame-Retardant Polypropylene Construction
Formex GL uses flame-retardant polypropylene as its base material. Its UL 94 classification varies by grade: GL-10 is rated VTM-0, while GL-17, GL-26 and GL-30 are rated V-0 according to the manufacturer's technical data. Grade selection should follow the flammability requirement of the finished electrical assembly.
Electrical Insulation Performance
The GL series provides dielectric insulation for separating conductive components and reducing the risk of unintended electrical contact. Dielectric strength, breakdown voltage and volume resistivity vary by thickness and grade. These values should be evaluated against the required voltage, insulation distance and assembly conditions.
Temperature Classification
The material has a UL 746B Relative Temperature Index (RTI) of 125°C for electrical properties and 115°C for mechanical properties without impact. These ratings provide separate reference values for electrical and mechanical performance during material selection.
Low Water Absorption
The manufacturer's technical data lists typical water absorption of 0.06% by weight under ASTM D-570. This low absorption value supports insulation applications where moisture exposure is a material selection consideration. Actual performance depends on the complete assembly and environmental conditions.
Scoring and Folding Capability
Formex GL sheets can be scored and folded to produce formed insulation barriers, covers and partitions. Custom fold lines, dimensions and clearances can be developed according to the component drawing. Fold radius and repeated flexing requirements should be evaluated through sample processing.
Multiple Thicknesses and Colors
GL-10, GL-17, GL-26 and GL-30 provide different thickness options for varying mechanical protection and insulation requirements. Natural and black materials are listed in the manufacturer's product data, subject to grade availability.
Technical Specifications Reference
|
Technical Property |
GL-10 |
GL-17 |
GL-26 |
GL-30 |
|
Thickness (mm) |
0.25 |
0.43 |
0.66 |
0.76 |
|
UL 94 Flammability |
VTM-0 |
V-0 |
V-0 |
V-0 |
|
Electrical RTI (°C) |
125 |
125 |
125 |
125 |
|
Mechanical RTI, Without Impact (°C) |
115 |
115 |
115 |
115 |
|
Density (g/cm³) |
0.972 |
0.972 |
0.972 |
0.972 |
|
Water Absorption |
0.06% |
0.06% |
0.06% |
0.06% |
|
CTI (V) |
600 |
600 |
600 |
600 |
Primary Industrial Application Fields
- EV Battery Packs & Electrical Enclosures
Formex GL can be converted into internal insulation barriers, component separators and protective partitions for selected battery pack and electrical enclosure assemblies. Material thickness, flame classification and electrical clearance requirements should be reviewed against the battery system design.
- Busbar & Power Distribution Assemblies
Suitable for die-cut insulation covers, barriers and protective components around busbars and conductive parts. The selected grade should match the required UL 94 classification, insulation dimensions and mechanical protection requirements.
- Power Supplies & Transformers
Used for insulating partitions, internal barriers and component separation in power supply units, transformers, inverters and related electrical equipment. Custom-cut profiles can follow the housing geometry and assembly layout.
- Electrical Control Systems
Applicable to insulation components in switchgear, control cabinets, circuit protection assemblies and industrial electrical equipment. Die-cut and folded parts can be prepared according to the required mounting positions and clearance dimensions.
- Electronics & Equipment Housings
Used for internal insulating partitions and protective sheets in electronic equipment, communication devices and electrical housings. Thin-gauge grades can be considered where installation space and component separation are important design factors


STK provides converting services for Formex GL materials according to customer drawings, component dimensions and assembly requirements.
Available processing options include:
Precision Die-Cutting
Flat insulation sheets, barriers, covers and custom-shaped components can be converted according to supplied CAD drawings or dimensional specifications.
Scoring & Folding
Score lines and fold geometries can be incorporated into selected components to create three-dimensional insulation barriers and partitions. Minimum bend radius and fold performance should be evaluated according to material thickness and component design.
Custom Dimensions
Part length, width, cutout positions, mounting holes and edge profiles can be specified according to the application. Dimensional tolerances should be agreed before production.
Material Thickness Selection
GL-10, GL-17, GL-26 and GL-30 can be evaluated according to insulation thickness, flame classification, mechanical requirements and available space within the assembly.
Sample & Drawing Evaluation
Customer drawings can be reviewed for material suitability, cutting feasibility and folding requirements. Prototype samples are recommended before confirming production quantities and dimensional tolerances.

Our factory & Equipment






Custom Adhesive Tape Solutions
We provide comprehensive adhesive tape customization and converting services, including custom thickness, size, core, packaging, release liners, and die-cutting solutions to meet your specific application requirements.

Custom Thickness
Custom thickness of adhesive tape is available according to customer's request.

Custom Size
Custom width/length of adhesive tape is available according to customer's request.

Custom Core
Custom core diameter of adhesive tape is available according to customer's request.

Custom Package
Custom package of adhesive tape is available according to customer's request.

Custom liner
Adhesive tape with release liner is available according to customer's request.

Die-cut Service
Die-cutting of adhesive tape is available according to customer's request.
Manufacturing & Delivery Process

Coating Adhesive

Rewinding Roll

Cutting Roll

Quality Inspection

Roll Packing

Delivery
Hot Tags: formex® gl series | advanced thin-gauge flame retardant insulation for modern electronics, China formex® gl series | advanced thin-gauge flame retardant insulation for modern electronics manufacturers, suppliers, factory










