
STK Tape supplies authentic 3M 7847, a high-performance Laser Markable Label Material featuring a specialized High Temp Acrylate Label construction designed for extreme thermal durability and high-precision marking. Engineered with a dual-layer Cast Modified Acrylate Facestock (black top layer over a white base), the surface is ablated by standard Nd-Yag Lasers to reveal fine-line characters, 2-D Symbologies, and high-density barcodes without using ribbons or thermal transfer inks.
Pre-coated with 3M High Performance Acrylic Adhesive 350, 3M 7847 delivers long-term adhesion to oily metals, powder coatings, and LSE Plastics. Designed for critical electronics tracking, it is widely utilized for Laser Printable Chip & SIM Card Identification, electronic component traceability, and permanent rating plates. Its intrinsically brittle top layer causes it to act as Destructible Labels, ensuring permanent physical breakage upon removal attempts for Tamper-Evident Identification.
Performance Features
High-Contrast Laser Marking & Readability: Optimized for high-speed laser ablation to deliver exceptional Bar Code Readability and optical contrast without needing inks or thermal transfer ribbons.
Extreme Thermal Stability: Demonstrates high continuous Temperature Resistance up to 200°C (392°F) and withstands peak short-term heat exposure up to 225°C (440°F) for 60 minutes or 275°C (530°F) for 1 minute.
High Holding Power Adhesion: Utilizes 3M High Performance Acrylic Adhesive 350 to bond permanently to challenging substrates, including low surface energy materials (LSE Plastics), textured metals, and engine parts.
Anti-Tamper & Security Protection: Functions as Destructible Labels to prevent non-destructive removal or reuse, serving as an effective seal for security and warranty validation.
TDS
|
Technical Metric |
3M Label Material 7831 |
3M Label Material 7380 |
Testing Standard / Condition |
|
Product Category |
Tamper-Evident "VOID" Label |
Tamper-Evident "VOID" Label |
Official 3M Designation |
|
Facestock Material |
Matte Silver Polyester Facestock |
Matte White Polyester Facestock |
High-durability PET film |
|
Facestock Caliper |
2.0 mil (0.051 mm / 51 µm) |
2.0 mil (0.051 mm / 51 µm) |
ASTM D3652 |
|
Adhesive Matrix Type |
Acrylic Adhesive 300 |
Acrylic Adhesive 350 |
Pressure-sensitive acrylic |
|
Adhesive Caliper |
0.8 mil (0.020 mm / 20 µm) |
1.1 mil (0.028 mm / 28 µm) |
High-tack adhesive layer |
|
Liner Type & Thickness |
55# Densified Kraft Liner (3.2 mil / 81 µm) |
55# Densified Kraft Liner (3.2 mil / 81 µm) |
ASTM D3652 |
|
Total Label Caliper (Excl. Liner) |
2.8 mil (0.071 mm / 71 µm) |
3.1 mil (0.079 mm / 79 µm) |
ASTM D3652 |
|
Tamper Indication Response |
Permanent "VOID" message transfer |
Permanent "VOID" message transfer |
Visible on facestock & substrate |
|
Peel Adhesion (Stainless Steel) |
55 N/100 mm (50 oz/in) |
65 N/100 mm (60 oz/in) |
ASTM D3330 (72 hr RT Dwell) |
|
Service Temperature Range |
-40°C to 150°C (-40°F to 302°F) |
-40°C to 150°C (-40°F to 302°F) |
Environmental rating |
|
Min. Application Temperature |
10°C (50°F) |
10°C (50°F) |
Surface application limit |
|
Printability Method |
Thermal Transfer Printability |
Thermal Transfer Printability |
Flexo, screen, TT resin ribbons |
|
Application Domain |
Tamper Indicating & Anti-Counterfeiting |
Tamper Indicating & Anti-Counterfeiting |
Brand protection & security |
Applications
Electronics & Telecommunications: Essential for Laser Printable Chip & SIM Card Identification, printed circuit board (PCB) serial tracking, and micro-component labeling.
Automotive Engine Bay Labeling: Engine compartment asset tracking, VIN plate marking, and emission control labels exposed to high heat and harsh fluids.
Tamper-Evident & Security Labeling: Serving as non-transferable Tamper-Evident Identification seals and warranty-void badges for industrial equipment and high-value hardware.
High-Density Industrial Barcoding: Laser engraving precise 2D matrix codes and barcodes directly onto machine rating plates for long-term asset tracking.

Precision Log Slitting: We process original 3M jumbo master rolls into custom narrow log roll widths with clean, non-tacky edges.
Cleanroom Precision Die-Cutting: Precision stamping of original 3M 7847 materials into custom shapes, pre-ablated labels, or individual sheets through Cleanroom Precision Die-Cutting.
Reliable B2B Direct Inventory: STK Tape maintains steady stock of 3M 7847 to support continuous OEM hardware and telecommunication production lines worldwide.

Our factory & Equipment






Custom Adhesive Tape Solutions
We provide comprehensive adhesive tape customization and converting services, including custom thickness, size, core, packaging, release liners, and die-cutting solutions to meet your specific application requirements.

Custom Thickness
Custom thickness of adhesive tape is available according to customer's request.

Custom Size
Custom width/length of adhesive tape is available according to customer's request.

Custom Core
Custom core diameter of adhesive tape is available according to customer's request.

Custom Package
Custom package of adhesive tape is available according to customer's request.

Custom liner
Adhesive tape with release liner is available according to customer's request.

Die-cut Service
Die-cutting of adhesive tape is available according to customer's request.
Manufacturing & Delivery Process

Coating Adhesive

Rewinding Roll

Cutting Roll

Quality Inspection

Roll Packing

Delivery
Hot Tags: authentic 3m 7847 label | high temp acrylate label, China authentic 3m 7847 label | high temp acrylate label manufacturers, suppliers, factory, 3M 468MP acrylic transfer tape, 3m 471 floor tape, 3m scotch brand 471 tape, automotive trim bonding tape, clean acrylic adhesive tape, Moisture resistant electrical tape










